Capability&Function

This round cold-vulcanizing patch is designed to repair round holes in inner tubes.
The patch consists of two layers: a semi-vulcanized adhesive layer and a fully vulcanized reinforced backing.
When used with inner tube repair adhesive, the patch completes vulcanization without heat, bonding seamlessly with the tube to form a single, unified structure.

Specification

12pc/box, 10boxes/bag,20bags/ctn

Application

Bike Tire Glue is mainly used for the bicycle, motorcycle and car inside the tube to repair.

How to use

1. Roughen the damaged area. The prepared surface should be slightly larger than the patch size. Keep the area clean.
2. Apply adhesive evenly over the roughened surface.
3. Allow the adhesive to dry naturally, then place the patch over the center of the damage. Press firmly and tap with a hammer to ensure full adhesion.

Caution

• 1 Use only in a well-ventilated area. Keep away from open flames and heat sources.
• 2 Prevent contact with eyes or skin. If contact occurs, rinse thoroughly with water. Seek medical attention if severe.
• 3 Bike Tire Glue must be kept out of reach of children. Do not ingest.
  Hot Tags: rubber patch glue, China rubber patch glue manufacturers, suppliers